Yamaha YFM90 2019 Owner'S Manual Download Page 114

Page: 114 / 126

8-37

EBU25754

Troubleshooting chart

Check the fuel level in
the fuel tank.

1. Fuel

There is enough fuel.

There is no fuel.

Check the battery.

Supply fuel.

The engine does not start.
Check the battery.

The engine does not start.
Check the ignition.

Operate the electric starter.

4. Compression

There is compression.

There is no compression.

The engine does not start. Have a Yamaha dealer check the ATV.

Have a Yamaha dealer check the ATV.

Remove the spark plug
and check the electrodes.

3. Ignition

Wipe off with a dry cloth and correct the
spark plug gap, or replace the spark plug.

Have a Yamaha dealer check the ATV.

The engine does not start.
Check the compression.

Operate the electric starter.

2. Battery

The engine turns over
quickly.

The engine turns over
slowly.

The battery is good.

Check the battery lead connections,
and have a Yamaha dealer charge
the battery if necessary.

Dry

Wet

Open the throttle halfway and operate
the electric starter.

UBD364E0.book Page 37 Monday, January 28, 2019 9:30 AM

Summary of Contents for YFM90 2019































































































































Search results

Summary of Contents for YFM90 2019

Reviews:

Related manuals for YFM90 2019

Brands by name

Popular brands

Yamaha YFM90 2019, Owner'S Manual

Search results

Summary of Contents for YFM90 2019

Reviews:

Related manuals for YFM90 2019

Brands by name

Popular brands