manualshive.com logo in svg

Yamaha YFM45FGX, Owner'S Manual

Share
Download
Yamaha YFM45FGX Owner'S Manual Download Page 57

6-4

6

3. Release the brake pedal, and then open the

throttle lever gradually.

Shifting: Neutral to Reverse and Reverse to
Park

NOTE:

The drive select lever cannot be shifted into or from
reverse or park without applying the brake pedal.

1. Bring the ATV to a complete stop.

2. Apply the brake pedal.
3. Shift from neutral to reverse or from reverse to

park and vice versa by moving the drive select
lever along the shift guide.

NOTE:

●

When in reverse, the reverse indicator light
should come on. If the indicator light does not
come on, have a Yamaha dealer check the elec-
trical circuit.

1. Drive select lever
2. L (Low-range)

3. H (High-range)

4. N (Neutral)
5. R (Reverse)

6. P (Park)

1. Drive select lever
2. L (Low-range)

3. H (High-range)

4. N (Neutral)
5. R (Reverse)

6. P (Park)

U17S10E0.book  Page 4  Friday, July 6, 2007  1:37 PM

Summary of Contents for YFM45FGX























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands