Yamaha YFM45FGX Page 110 Owner'S Manual Download

Page: 110 / 182

8-15

3. Remove the spark plug as shown, with the

spark plug wrench included in the owner’s tool
kit.

To check the spark plug

1. Check that the porcelain insulator around the

center electrode of the spark plug is a medi-
um-to-light tan (the ideal color when the ATV
is ridden normally).

NOTE:

If the spark plug shows a distinctly different color,
the engine could be operating improperly. Do not
attempt to diagnose such problems yourself. In-
stead, have a Yamaha dealer check the ATV.

2. Check the spark plug for electrode erosion

and excessive carbon or other deposits, and
replace it if necessary.

To install the spark plug

1. Measure the spark plug gap with a wire thick-

ness gauge and, if necessary, adjust the gap
to specification.

1. Spark plug wrench

Specified spark plug:

NGK/DR8EA

Spark plug gap:

0.6–0.7 mm (0.024–0.028 in)

U17S10E0.book Page 15 Friday, July 6, 2007 1:37 PM

Summary of Contents for YFM45FGX























































































































































































Search results

Summary of Contents for YFM45FGX

Reviews:

Related manuals for YFM45FGX

Brands by name

Popular brands

Yamaha YFM45FGX, Owner'S Manual

Search results

Summary of Contents for YFM45FGX

Reviews:

Related manuals for YFM45FGX

Brands by name

Popular brands