manualshive.com logo in svg

Yamaha YFM45FGX, Owner'S Manual

Share
Download
Yamaha YFM45FGX Owner'S Manual Download Page 133

8-38

8

EBU24070

Adjusting the drive select lever safety 
system cable 

The drive select lever safety system cable stretch-
es with use, which can result in improper function.
Therefore, the safety system cable should be
checked and adjusted at the intervals specified in
the periodic maintenance and lubrication chart.

EBU28413

Checking the front brake pads and rear 
brake friction plates 

The front brake pads and the rear brake friction
plates must be checked for wear at the intervals
specified in the periodic maintenance and lubrica-
tion chart.

NOTE:

This ATV is equipped with a wet, multiple-disc type
rear brake, which is located inside of the final gear
case.

EBU24171

Front brake pads

Check each front brake pad for damage and mea-
sure the lining thickness. If a brake pad is dam-
aged or if the lining thickness is less than 1.0 mm
(0.04 in), have a Yamaha dealer replace the brake
pads as a set.

NOTE:

The wheels need to be removed to check the
brake pads. (See page 8-58.)

1. Lining thickness

U17S10E0.book  Page 38  Friday, July 6, 2007  1:37 PM

Summary of Contents for YFM45FGX























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands