Yamaha XVS250 2001, Service Manual

Page: 114 / 332

4-4
FRONT WHEEL AND BRAKE DISC
CHAS
NOTE:
3 Nm (0.3 m kg)
NOTE:
WARNING
3. Check:
spokes
Bends / damage
Replace.
Loose Tighten.
Tap the spokes with a screwdriver.
A tight spoke will emit a clear, ringing tone, a
loose spoke will sound flat.
4. Tighten:
spokes
After tightening the spokes, measure the front
wheel runout.
5. Measure:
front wheel radial runout 1
front wheel lateral runout 2
Over the specified limits Replace.
Front wheel radial runout limit
2.0 mm
Front wheel lateral runout limit
2.0 mm
6. Check:
collars
Damage / wear
Replace.
New tires have a relatively low grip on the
road surface until they have been slightly
worn.
Therefore, approximately 100 km should
be traveled at normal speed before any
highspeed riding is done.
7. Check:
wheel bearings
Front wheel turns roughly or is loose
Re-
place the wheel bearings.
oil seals
Damage / wear
Replace.
8. Replace:
wheel bearings
New
oil seals
New