background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-2

6

EAU17705

Periodic maintenance and lubrication chart 

NOTE:

The annual checks must be performed every year, except if a kilometer-based maintenance is performed in-
stead.

From 50000 km, repeat the maintenance intervals starting from 10000 km.

Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical
skills.

NO.

ITEM

CHECK OR MAINTENANCE JOB

ODOMETER READING (

×

 1000 km)

ANNUAL 

CHECK

1

10

20

30

40

1

*

Fuel line

• Check fuel hoses for cracks or damage.

2

*

Fuel filter

• Check condition.

3

Spark plugs

• Check condition.
• Clean and regap.

• Replace.

4

*

Valves

• Check valve clearance.
• Adjust.

5

Air filter element

• Clean.

• Replace.

6

Clutch

• Check operation.
• Adjust.

7

*

Front brake

• Check operation, fluid level and vehicle for fluid leakage.

• Replace brake pads.

Whenever worn to the limit

8

*

Rear brake

• Check operation, fluid level and vehicle for fluid leakage.

• Replace brake pads.

Whenever worn to the limit

U3B820E0.book  Page 2  Tuesday, April 12, 2005  9:43 AM

Summary of Contents for XVS1100V































































































Reviews: