INSTRUMENT AND CONTROL FUNCTIONS
3-12
3
EAU13610
Starter (choke) lever “
”
Starting a cold engine requires a richer
air-fuel mixture, which is supplied by
the starter (choke).
Move the lever in direction (a) to turn on
the starter (choke).
Move the lever in direction (b) to turn off
the starter (choke).
CAUTION:
ECA10990
Do not use the starter (choke) for
more than 3 minutes as the exhaust
pipe may discolor from excessive
heat. In addition, extended use of
the starter (choke) will cause after-
burning. If this occurs, turn off the
starter (choke).
EAU14213
Seats (XVS1100)
Passenger seat
To remove the passenger seat
Remove the nut and washer, and then
pull the passenger seat up.
To install the passenger seat
1. Insert the projection on the front of
the passenger seat into the seat
holder as shown and place the
seat in the original position.
2. Install the washer and nut, and
then tighten the nut to the specified
torque.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the bolts and passenger
seat holder, and then pull the rider
seat up.
1. Starter (choke) lever “
”
1. Nut
2. Washer
Tightening torque:
Passenger seat nut:
21 Nm (2.1 m·kgf, 15 ft·lbf)
1. Projection
2. Seat holder
U3B820E0.book Page 12 Tuesday, April 12, 2005 9:43 AM
