3 - 23
CHK
ADJ
c. Tighten the new oil filter cartridge to
specification with an oil filter wrench.
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
6. Check:
• engine oil drain bolt gasket
Damage
→
Replace.
7. Install:
• engine oil drain bolt
8. Fill:
• oil tank
(with the specified amount of the recom-
mended engine oil)
NOTE:
• Pour the engine oil in several stages.
• First, pour in 2.5 L (2.2 Imp qt, 2.6 US qt)
of oil, and then start the engine and rev it
3 to 5 times. Stop the engine, and then
pour in the remainder of the specified
amount.
ACHTUNG:
CAUTION:
When starting the engine make sure the
dipstick is securely fitted into the oil tank.
9. Fill: (when the engine is disassembled)
• crankcase and oil tank
T
R
.
.
Oil filter cartridge
17 Nm (1.7 m • kg, 12 ft • lb)
Quantity
Total amount
5.0 L (4.4 lmp qt, 5.3 US qt)
Periodic oil replacement
3.7 L (3.3 lmp qt, 3.9 US qt)
With oil filter cartridge replace-
ment
4.1 L (3.6 lmp qt, 4.3 US qt)
Quantity
Total amount
5.0 L (4.4 lmp qt, 5.3 US qt)
Oil tank
2.0 L (1.8 lmp qt, 2.1 US qt)
Crankcase
3.0 L (2.6 lmp qt, 3.2 US qt)
T
R
.
.
43 Nm (4.3 m · kg, 31 ft · lb)
CHANGING THE ENGINE OIL
3
Summary of Contents for XV16AL
