Instrument an
d
control functions
4-8
4
the bottom set button to select the last
digit and follow the same procedure.
Push the bottom set button to confirm
the value.
TIP
The maximum possible entering
value is 900 km or 600 mi.
The countdown tripmeter will start
as soon as you begin riding. When
the countdown reaches “0” the
display changes to the countdown
tripmeter “TRIP CD” and flashes
10 times.
To reset the countdown tripmeter,
select it and while the digits flash,
push the bottom set button until it
is reset.
EAU90731
Fuel reserve tripmeter
If the last segment of the fuel meter
starts flashing, the display automati-
cally changes to the fuel reserve trip-
meter “TRIP F” and starts counting the
distance traveled from that point.
To reset the fuel reserve tripmeter, se-
lect it by pushing the top set button,
and while the digits flash, push the bot-
tom set button until it is reset.
TIP
If you do not reset the fuel reserve trip-
meter manually, it will reset automati-
cally and disappear from the display
after refueling and traveling 5 km (3 mi).
EAU90740
Instantaneous fuel consumption
d
isplay
This display shows the fuel consump-
tion under the current riding condi-
tions. It can be set to either “km/L” or
“L/100 km”, or “MPG”. To switch the
fuel consumption measurement units,
push the top set button until the mea-
surement units change.
“km/L”: the distance that can be
traveled on 1.0 L of fuel.
“L/100 km”: the amount of fuel
necessary to travel 100 km.
“MPG”: the distance that can be
traveled on 1.0 US.gal of fuel.
To switch the instantaneous fuel con-
sumption settings, push and hold the
bottom set button until the display
changes.
TIP
When traveling under 20 km/h (12
mi/h), “_ _._” is displayed.
EAU87790
TIP
The instantaneous fuel consumption
function should be used for general
reference only. Do not use this figure to
estimate the distance that can be trav-
eled on the current tank of fuel.
1. Instantaneous fuel consumption display
1
UBAU10E0.book Page 8 Monday, February 17, 2020 10:12 AM