Instrument and control functions
5-15
1
2
3
4
5
6
7
8
9
10
11
12
13
“Vehicle Setting”
The vehicle setting module allows you
to adjust setting for the BC and quick
shifter.
BC
The brake control system has two set-
tings, BC1 and BC2. Select BC1 when
only standard ABS is desired. Select
BC2 to have the brake control system
further regulate brake pressure while
cornering to suppress lateral wheel slip.
TIP
For skilled riders and when riding at the
track, due to varying conditions, the
BC2 brake system may engage sooner
than expected relative to your desired
cornering speed or intended cornering
line.
Quick shifter
The quick shifter indicators are divided
into QS
and QS
sections. QS
and QS
are not linked and can be in-
dependently turned on or off.
The quick shifter can be set to ON or
OFF.
OFF turns the respective upshift or
downshift function off, and the clutch le-
ver must then be used when shifting in
that direction.
TIP
If the quick shifter setting cannot be
changed: turn the engine off with the
gear position set to neutral, then
change the setting.
“Shift Indicator”
This module allows a custom shift indi-
cator to be set. When the engine r/min
(rotations per minute) are in the speci-
fied range, the gear indicator will flash.
This module has 3 options:
“IND Mode” - the shift indicator can be
turned ON/OFF
BC Setting
QS Setting
MPH
Vehicle Setting
MPH
BC Setting
BC
2
MPH
QS Setting
QS
ON
QS
ON
MPH
Shift Indicator
IND Mode
ON
IND Start
8000 r/min
IND Stop
10000 r/min
BEA-28199-11.book 15 ページ ２０２２年１０月１３日 木曜日 午後２時３０分
