Instrument and control functions
5-16
1
2
3
4
5
6
7
8
9
10
11
12
13
“IND Start” - the r/min at which the indi-
cator starts flashing can be chosen.
Once selected, rotate the wheel switch
up/down to increase or decrease the
r/min value by increments of 200 r/min.
“IND Start” is settable between 6000 -
12800 r/min.
“IND Stop” - the r/min at which the indi-
cator stops flashing can be chosen.
Once selected, rotate the wheel switch
up/down to increase or decrease the
r/min value by increments of 200 r/min.
“IND Stop” is settable between 6200 -
13000 r/min.
“Maintenance”
This module allows you to record the
distance traveled between engine oil
changes (use the OIL item), and for two
other items of your choice (use INTER-
VAL 1 and INTERVAL 2).
To reset a maintenance trip meter, se-
lect it and then press and hold the
wheel switch.
TIP
Maintenance item names cannot be
changed.
“Unit”
This module allows you to switch the
display between metric and imperial
measurement units.
When using kilometers, the fuel con-
sumption units can be changed be-
tween “km/L” or “L/100km”. When
using miles, MPG will be available.
Temperature units can be switched be-
tween Celsius and Fahrenheit.
OIL
INTERVAL 1
INTERVAL 2
1 0 0 0
MPH
mile
1 0 0 0
mile
1 0 0 0
mile
Maintenance
km or mile
mile
°F
°C or °F
MPH
Unit
km/L or L/100km
km or mile
km
L/100km
°C
km/L or L/100km
°C or °F
MPH
Unit
BEA-28199-11.book 16 ページ ２０２２年１０月１３日 木曜日 午後２時３０分
