Yamaha XJ6NA Owner'S Manual Download

Page: 95 / 98

INDEX

ABS ...................................................... 3-14
ABS warning light ................................... 3-7
Air filter element, replacing ................... 6-16
Anti-theft alarm (optional) ..................... 3-11
Auxiliary light bulb, replacing ................ 6-37

Battery .................................................. 6-31
Brake and clutch levers,

checking and lubricating..................... 6-28

Brake and shift pedals,

checking and lubricating..................... 6-27

Brake fluid, changing ............................ 6-24
Brake fluid level, checking .................... 6-23
Brake lever ........................................... 3-14
Brake pedal .......................................... 3-14

Cables, checking and lubricating .......... 6-27
Care ........................................................ 7-1
Catalytic converter................................ 3-18
Clutch lever........................................... 3-13
Clutch lever free play, adjusting ........... 6-21
Coolant ................................................. 6-12
Coolant temperature warning light.......... 3-4
Cowling and panels,

removing and installing......................... 6-7

Dimmer switch ...................................... 3-12
Drive chain, cleaning and lubricating .... 6-26
Drive chain slack .................................. 6-25

Engine break-in ...................................... 5-3
Engine idling speed .............................. 6-17
Engine oil and oil filter cartridge ............. 6-9

Engine stop switch ................................3-12
Engine trouble warning light ....................3-7

Front and rear brake pads, checking ....6-23
Front fork, checking...............................6-29
Fuel .......................................................3-16
Fuel consumption, tips for reducing ........5-3
Fuel tank breather/overflow hose ..........3-17
Fuel tank cap.........................................3-15
Fuses, replacing ....................................6-32

Handlebar position, adjusting ................3-20
Handlebar switches ...............................3-12
Hazard switch........................................3-13
Headlight bulb, replacing.......................6-33
Helmet holder........................................3-19
High beam indicator light.........................3-4
Horn switch ...........................................3-12

Identification numbers .............................9-1
Ignition circuit cut-off system .................3-22
Immobilizer system .................................3-1
Immobilizer system indicator light ...........3-7
Indicator and warning lights ....................3-4

Key identification number........................9-1

License plate light bulb, replacing .........6-37

Main switch/steering lock ........................3-2
Maintenance and lubrication, periodic.....6-3
Maintenance, emission control system ...6-2
Matte color, caution .................................7-1
Model label ..............................................9-2

Multi-function meter unit ......................... 3-8

Neutral indicator light .............................. 3-4

Oil level warning light .............................. 3-4

Parking.................................................... 5-4
Part locations .......................................... 2-1
Pass switch ........................................... 3-12

Rear brake light switch, adjusting ......... 6-22

Tail/brake light bulb, replacing .............. 6-36
Throttle cable free play, checking ......... 6-18
Throttle grip and cable,

checking and lubricating ..................... 6-27

Tires...................................................... 6-19

U36BE0E0.book Page 1 Monday, October 6, 2008 4:47 PM

Summary of Contents for XJ6NA



































































































Search results

Summary of Contents for XJ6NA

Reviews:

Related manuals for XJ6NA

Brands by name

Popular brands

Yamaha XJ6NA, Owner'S Manual

Search results

Summary of Contents for XJ6NA

Reviews:

Related manuals for XJ6NA

Brands by name

Popular brands