Yamaha XJ6NA Owner'S Manual Download

Page: 81 / 98

PERIODIC MAINTENANCE AND ADJUSTMENT

6-37

EAU24312

Replacing the license plate
light bulb

1. Remove the license plate light unit

by removing the screws.

2. Remove the socket (together with

the bulb) by pulling it out.

3. Remove the burnt-out bulb by pull-

ing it out.

4. Insert a new bulb into the socket.
5. Install the socket (together with the

bulb) by pushing it in.

6. Install the license plate light unit by

installing the screws.

EAU42872

Replacing the auxiliary light
bulb

If the auxiliary light bulb burns out, re-
place it as follows.

1. Remove the headlight unit. (See

page 6-33.)

2. Remove the auxiliary light socket

(together with the coupler) by turn-
ing the socket counterclockwise.

3. Remove the burnt-out bulb by pull-

ing it out.

1. License plate light unit

2. Screw

1. License plate light bulb socket
2. License plate light bulb

1. Auxiliary light bulb socket

U36BE0E0.book Page 37 Monday, October 6, 2008 4:47 PM

Summary of Contents for XJ6NA



































































































Search results

Summary of Contents for XJ6NA

Reviews:

Related manuals for XJ6NA

Brands by name

Popular brands

Yamaha XJ6NA, Owner'S Manual

Search results

Summary of Contents for XJ6NA

Reviews:

Related manuals for XJ6NA

Brands by name

Popular brands