Yamaha XJ6N Owner'S Manual Download

Page: 97 / 104

SPECIFICATIONS

8-1

Dimensions:

Overall length:

2120 mm (83.5 in)

Overall width:

770 mm (30.3 in)

Overall height:

1085 mm (42.7 in)

Seat height:

785 mm (30.9 in)

Wheelbase:

1440 mm (56.7 in)

Ground clearance:

140 mm (5.51 in)

Minimum turning radius:

2800 mm (110.2 in)

Weight:

Curb weight:

XJ6N 205 kg (452 lb)
XJ6NA 210 kg (463 lb)

Engine:

Engine type:

Liquid cooled 4-stroke, DOHC

Cylinder arrangement:

Inline 4-cylinder

Displacement:

600 cm³

Bore

stroke:

65.5

44.5 mm (2.58

1.75 in)

Compression ratio:

12.20 : 1

Starting system:

Electric starter

Lubrication system:

Wet sump

Engine oil:

Recommended brand:

YAMALUBE

Type:

SAE 10W-30, 10W-40, 10W-50, 15W-40,
20W-40 or 20W-50

Recommended engine oil grade:

API service SG type or higher, JASO
standard MA

Engine oil quantity:

Without oil filter cartridge replacement:

2.50 L (2.64 US qt, 2.20 Imp.qt)

With oil filter cartridge replacement:

2.80 L (2.96 US qt, 2.46 Imp.qt)

Cooling system:

Coolant reservoir capacity (up to the
maximum level mark):

0.25 L (0.26 US qt, 0.22 Imp.qt)

Radiator capacity (including all routes):

2.00 L (2.11 US qt, 1.76 Imp.qt)

Air filter:

Air filter element:

Oil-coated paper element

Fuel:

Recommended fuel:

Regular unleaded gasoline only

Fuel tank capacity:

17.3 L (4.57 US gal, 3.81 Imp.gal)

Fuel reserve amount:

3.2 L (0.85 US gal, 0.70 Imp.gal)

Fuel injection:

Throttle body:

ID mark:

20SF 20

Spark plug(s):

Manufacturer/model:

NGK/CR9E

Spark plug gap:

0.7–0.8 mm (0.028–0.031 in)

Clutch:

Clutch type:

Wet, multiple-disc

Transmission:

Primary reduction ratio:

1.955 (86/44)

Final drive:

Chain

Secondary reduction ratio:

2.875 (46/16)

Transmission type:

Constant mesh 6-speed

Operation:

Left foot operation

Gear ratio:

1st:

2.846 (37/13)

–20 –10 0

10 20 30 40 50 ˚C

10 30 50 70 90 110

130 ˚F

SAE 10W-30

SAE 15W-40

SAE 20W-40

SAE 20W-50

SAE 10W-40

SAE 10W-50

U20SE3E0.book Page 1 Monday, April 23, 2012 10:47 AM

Summary of Contents for XJ6N









































































































Search results

Summary of Contents for XJ6N

Reviews:

Related manuals for XJ6N

Brands by name

Popular brands

Yamaha XJ6N, Owner'S Manual

Search results

Summary of Contents for XJ6N

Reviews:

Related manuals for XJ6N

Brands by name

Popular brands