Yamaha wr450fb Owner'S Manual Download

Page: 86 / 100

PERIODIC MAINTENANCE AND ADJUSTMENT

7-40

EAU53121

Troubleshooting charts

Starting problems or poor engine performance

Check the fuel level in
the fuel tank.

1. Fuel

There is enough fuel.

There is no fuel.

Check the compression.

Supply fuel.

The engine does not start.
Check the compression.

Operate the electric starter
or the kickstarter.

2. Compression

There is compression.

There is no compression.

Check the ignition.

Have a Yamaha dealer
check the vehicle.

Remove the spark plug
and check the electrodes.

3. Ignition

Wipe off with a dry cloth and correct the
spark plug gap, or replace the spark plug.

Have a Yamaha dealer check the vehicle.

The engine does not start.
Have a Yamaha dealer
check the vehicle.

The engine does not start.
Check the battery.

Operate the electric starter.

4. Battery

The engine turns over
quickly.

The engine turns over
slowly.

The battery is good.

Dry

Wet

Operate the electric starter or the
kickstarter.

Check the battery lead connections,
and have a Yamaha dealer charge
the battery if necessary.

1DX-9-20.book 40 ページ２０１１年１０月１２日　水曜日　午前９時３９分

Summary of Contents for wr450fb





































































































Search results

Summary of Contents for wr450fb

Reviews:

Related manuals for wr450fb

Brands by name

Popular brands

Yamaha wr450fb, Owner'S Manual

Search results

Summary of Contents for wr450fb

Reviews:

Related manuals for wr450fb

Brands by name

Popular brands