manualshive.com logo in svg

Yamaha WOLVERINE, Owner'S Manual

Share
Download
Yamaha WOLVERINE Owner'S Manual Download Page 86

7-22

CAUTION:

Do not shift gears without releasing the
throttle. Damage to the engine or drive
train may occur.

When slowing down or stopping, release the
throttle and apply the brakes smoothly and
evenly. As you slow down, shift to a lower
gear. Be sure that the engine has sufficiently
slowed before engaging a lower gear. Improp-
er use of the brakes or shifting can cause the
tires to lose traction, reducing control and in-
creasing the possibility of an accident.

WARNING

POTENTIAL HAZARD

Engaging a lower gear when the engine
speed is too high.

WHAT CAN HAPPEN

The wheels could stop rotating. This
could cause loss of control, an accident
and injury. It could also cause engine or
drive train damage.

HOW TO AVOID THE HAZARD

Make sure the engine has sufficiently
slowed before shifting to a lower gear.

U4KB1C.book  Page 22  Wednesday, October 23, 2002  2:54 PM

Summary of Contents for WOLVERINE








































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands