Yamaha WOLVERINE Owner'S Manual Download Page 117

Page: 117 / 167

8-12

1. Drain bolt

5. Install the drain bolt and tighten to speci-

fication.

6. Fill the differential gear case with oil.

CAUTION:

Be sure no foreign material enters the dif-
ferential gear case.

7. Install the filler bolt and tighten to specifi-

cation.

8. Check for oil leakage. If oil leakage is

found, check for the cause.

Tightening torque:

Drain bolt (differential gear case):

12 Nm (1.2 m·kg, 8.7 ft·lb)

Recommended oil:

SAE 80 or SAE 80W-90
API “GL-5” Hypoid gear oil for L.S.D.
(Limited Slip Differential)

Oil quantity:

Periodic oil change:

0.18 L (0.16 Imp qt, 0.19 US qt)

Total amount:

0.2 L (0.18 Imp qt, 0.21 US qt)

Tightening torque:

Filler bolt (differential gear case):

12 Nm (1.2 m·kg, 8.7 ft·lb)

U4KB1C.book Page 12 Wednesday, October 23, 2002 2:54 PM

Summary of Contents for WOLVERINE








































































































































































Search results

Summary of Contents for WOLVERINE

Reviews:

Related manuals for WOLVERINE

Brands by name

Popular brands

Yamaha WOLVERINE, Owner'S Manual

Search results

Summary of Contents for WOLVERINE

Reviews:

Related manuals for WOLVERINE

Brands by name

Popular brands