Yamaha WOLVERINE Owner'S Manual Download Page 48

Page: 48 / 167

5-9

EBU00153

Lights

Check the headlight and taillight to make sure
they are in working condition. Repair as nec-
essary for proper operation.

EBU00155

Switches

Check the operation of the headlight switch,
engine stop switch and any other switches.
Repair as necessary for proper operation.

EBU00499

Battery

Check fluid level and fill if necessary. Use only
distilled water if refilling is necessary. (See
pages 8-33 ~ 8-35.)

EBU00157

Tires

WARNING

POTENTIAL HAZARD

Operating this ATV with improper tires,
or with improper or uneven tire pres-
sure.

WHAT CAN HAPPEN

Use of improper tires on this ATV, or op-
eration of this ATV with improper or un-
even tire pressure, may cause loss of
control, increasing your risk of acci-
dent.

HOW TO AVOID THE HAZARD

1. The tires listed below have been ap-

proved by Yamaha Motor Co., Ltd.
for this model. Other tire combina-
tions are not recommended.

ACE-01EACE-01E

Manufacturer

Size

Type

Front

DUNLOP

AT23

8 - 12

KT403

Rear

DUNLOP

AT23

10 - 12

KT407

U4KB1C.book Page 9 Wednesday, October 23, 2002 2:54 PM

Summary of Contents for WOLVERINE








































































































































































Search results

Summary of Contents for WOLVERINE

Reviews:

Yamaha WOLVERINE, Owner'S Manual, Page: 48 / 167

Search results

Summary of Contents for WOLVERINE

Reviews: