Yamaha WOLVERINE YXE70WPAJ 2017 Owner'S Manual Download Page 123

Page: 123 / 180

8-24

4. Install the differential gear oil drain bolt

and its new gasket, and then tighten the
bolt to the specified torque.

5. Refill the differential gear case with the

recommended oil.

TIP



GL-4 is a quality and additive rating; GL-5
rated hypoid gear oils may also be used.



If desired, an SAE 80W-90 hypoid gear oil
may be used instead.

6. Check the oil filler bolt gasket for dam-

age, and replace it if necessary.

7. Install the differential gear oil filler bolt

and its gasket, and then tighten the bolt
to the specified torque.

8. Check for oil leakage. If oil leakage is

found, check for the cause.

EBU33661

Coolant

The coolant level should be checked regular-
ly. In addition, the coolant must be changed
at the intervals specified in the periodic main-
tenance chart.

Tightening torque:

Differential gear oil drain bolt:

9.8 N·m (0.98 kgf·m, 7.2 lb·ft)

Tightening torque:

Differential gear oil filler bolt:

23 N·m (2.3 kgf·m, 17 lb·ft)

Recommended coolant:

YAMALUBE coolant

Coolant quantity:

Coolant reservoir (up to full level):

0.28 L (0.30 US qt, 0.25 Imp.qt)

Radiator (including all routes):

2.85 L (3.01 US qt, 2.51 Imp.qt)

UB3D10E0.book Page 24 Thursday, August 17, 2017 4:19 PM

Summary of Contents for WOLVERINE YXE70WPAJ 2017





















































































































































































Search results

Summary of Contents for WOLVERINE YXE70WPAJ 2017

Reviews:

Related manuals for WOLVERINE YXE70WPAJ 2017

Brands by name

Popular brands

Yamaha WOLVERINE YXE70WPAJ 2017, Owner'S Manual

Search results

Summary of Contents for WOLVERINE YXE70WPAJ 2017

Reviews:

Related manuals for WOLVERINE YXE70WPAJ 2017

Brands by name

Popular brands