8-55
8
5. Wait for the headlight bulb to cool before
touching or removing it. Remove the
burnt-out bulb by pulling it out.
6. Place a new headlight bulb into position,
and then secure it with the bulb holder.
NOTICE:
Do not touch the glass part of
the bulb. Oil from your fingers or other
contamination will adversely affect the
transparency of the glass, luminosity
of the bulb, and bulb life. Thoroughly
clean off any dirt and fingerprints us-
ing a cloth moistened with alcohol or
thinner.
[ECB00653]
7. Connect the headlight coupler.
8. Install the bulb cover and the cover at the
rear of the headlight.
NOTICE:
Make
sure the headlight bulb cover is se-
curely fitted over the bulb holder and
seated properly.
[ECB02210]
9. Adjust the headlight beam if necessary.
1. Headlight bulb holder
1
1. Do not touch the glass part of the bulb.
1
UB3D10E0.book Page 55 Thursday, August 17, 2017 4:19 PM
