manualshive.com logo in svg

Yamaha WOLVERINE YFM350FXT, Owner'S Manual

Share
Download
Yamaha WOLVERINE YFM350FXT Owner'S Manual Download Page 75

7-11

Loading and accessories 

Use extra caution when riding the ATV with
additional loads, such as accessories or car-
go. The ATV’s handling may be adversely af-
fected. Reduce your speed when adding
additional loads.

MAXIMUM LOADING LIMIT 

●

Vehicle loading limit (total weight of 
cargo, rider and accessories, and 
tongue weight): 180 kg (397 lb) 

●

Storage box: 2 kg (4.4 lb)

WARNING

POTENTIAL HAZARD 
Overloading this ATV or carrying or tow-
ing cargo improperly. 
WHAT CAN HAPPEN 
Could cause changes in vehicle han-
dling which could lead to an accident. 
HOW TO AVOID THE HAZARD 
Never exceed the stated load capacity
for this ATV. 
Cargo should be properly distributed
and securely attached. Reduce speed
when carrying cargo or pulling a trailer.
Allow greater distance for braking. 
Always follow the instructions in your
Owner’s Manual for carrying cargo or
pulling a trailer.

U2D410.book  Page 11  Thursday, April 1, 2004  1:59 PM

Summary of Contents for WOLVERINE YFM350FXT










































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands