manualshive.com logo in svg

Yamaha WOLVERINE YFM350FXT, Owner'S Manual

Share
Download
Yamaha WOLVERINE YFM350FXT Owner'S Manual Download Page 5

EBU15000

IMPORTANT NOTICE

This ATV is designed and manufactured for OFF-ROAD use only. It is illegal and unsafe to oper-
ate this ATV on any public street, road or highway.
This ATV complies with all applicable OFF-ROAD noise level and spark arrester laws and regu-
lations in effect at the time of manufacture.
Please check your local riding laws and regulations before operating this ATV. 

EBU00981

AFFIX DEALER

LABEL HERE

YFM350FXT

OWNER’S MANUAL

© 2004 by Yamaha Motor Corporation, 

U.S.A.

1st edition, March 2004

All rights reserved.

Any reprinting or unauthorized use

without the written permission

of Yamaha Motor Corporation, U.S.A.

is expressly prohibited.

Printed in Japan.

P/N LIT-11626-18-13

U2D410.book  Page 2  Thursday, April 1, 2004  1:59 PM

Summary of Contents for WOLVERINE YFM350FXT










































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands