manualshive.com logo in svg

Yamaha WOLVERINE YFM350FXT, Owner'S Manual

Share
Download
Yamaha WOLVERINE YFM350FXT Owner'S Manual Download Page 42

5-2

EBU00854

Front and rear brakes
Brake levers and brake pedal

Check for correct free play in the brake levers
and brake pedal. If the free play is incorrect,
adjust it. (See pages 8-27–8-31.) Check the
operation of the brake levers and brake pedal.
They should move smoothly and there should
be a firm feeling when the brakes are applied.
If not, have the machine inspected by a
Yamaha dealer.

Brake fluid level

Check the brake fluid level. Add fluid if neces-
sary. (See pages 8-26–8-27.)

WARNING

POTENTIAL HAZARD

Failure to inspect the ATV before oper-
ating. 
Failure to properly maintain the ATV.

WHAT CAN HAPPEN

Increases the possibility of an accident
or equipment damage.

HOW TO AVOID THE HAZARD

Always inspect your ATV each time you
use it to make sure the ATV is in safe op-
erating condition.
Always follow the inspection and main-
tenance procedures and schedules de-
scribed in the Owner’s Manual.

Recommended brake fluid: DOT 4

U2D410.book  Page 2  Thursday, April 1, 2004  1:59 PM

Summary of Contents for WOLVERINE YFM350FXT










































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands