manualshive.com logo in svg

Yamaha WOLVERINE YFM350FXT, Owner'S Manual

Share
Download
Yamaha WOLVERINE YFM350FXT Owner'S Manual Download Page 52

6-1

EBU00161

1-

OPERATION

WARNING

Indicates a potential hazard that could
result in serious injury or death.

EBU05021

Starting a cold engine

1. Set the parking brake.
2. Turn the fuel cock to “ON”.
3. Turn the main switch to “ON” and the en-

gine stop switch to “RUN”.

4. Shift the transmission into neutral.

WARNING

POTENTIAL HAZARD

Operating ATV without being familiar
with all controls.

WHAT CAN HAPPEN

Loss of control, which could cause an
accident or injury.

HOW TO AVOID THE HAZARD

Read the Owner’s Manual carefully. If
there is a control or function you do not
understand, ask your Yamaha dealer.

WARNING

POTENTIAL HAZARD
Freezing control cables in cold weather.
WHAT CAN HAPPEN
You could be unable to control the ATV,
which could lead to an accident or colli-
sion.
HOW TO AVOID THE HAZARD
When riding in cold weather, always
make sure all control cables work
smoothly before you begin riding.

U2D410.book  Page 1  Thursday, April 1, 2004  1:59 PM

Summary of Contents for WOLVERINE YFM350FXT










































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands