Yamaha WOLVERINE RMAX2 2024 Owner'S Manual Download

Page: 57 / 196

5-19

TIP

When the brake pedal is pressed and then the
accelerator pedal is pressed, the brake over-
ride system will not engage.

EBU35642

Parking brake lever

Setting the parking brake lever will help keep
the vehicle from moving while parked.
To engage the parking brake, pull the lever
firmly.

To release the parking brake, pull slightly on
the lever, press the release button, and then
push the lever to its original position.

TIP



Spring tension helps return the lever to its
original position.



If you drive the vehicle with the parking
brake engaged, a buzzer will sound.

EBU31441

Drive select lever

1. Parking brake lever
2. Release button
3. Pull to set.

1. Drive select lever

UD2670E0.book Page 19 Tuesday, April 25, 2023 1:24 PM

Summary of Contents for WOLVERINE RMAX2 2024





































































































































































































Search results

Summary of Contents for WOLVERINE RMAX2 2024

Reviews:

Related manuals for WOLVERINE RMAX2 2024

Brands by name

Popular brands

Yamaha WOLVERINE RMAX2 2024, Owner'S Manual

Search results

Summary of Contents for WOLVERINE RMAX2 2024

Reviews:

Related manuals for WOLVERINE RMAX2 2024

Brands by name

Popular brands