manualshive.com logo in svg

Yamaha WOLVERINE RMAX2 2024, Owner'S Manual

Share
Download
Yamaha WOLVERINE RMAX2 2024 Owner'S Manual Download Page 49

5-11

5

TIP

The coolant temperature display can be set
to “°C” or “°F”. To switch the temperature
units, turn the key to “

” (off), then while

holding the “RESET” button pushed, turn
the key to “

” (on).

The radiator fan turns on and off automati-
cally according to the coolant temperature.

 

Fuel gauge

The fuel gauge indicates the amount of fuel in
the fuel tank. The display segments of the fuel
gauge disappear from “F” (full) towards “E”
(empty) as the fuel level decreases. When the
last segment starts flashing, approximately
9.5 L (2.51 US gal, 2.09 Imp.gal) of fuel re-
mains. Refuel as soon as possible.

TIP

If the electrical circuit for the fuel gauge is not
working correctly, all display segments will
flash repeatedly. Have a Yamaha dealer
check the vehicle.

 

1. Fuel gauge

1

UD2670E0.book  Page 11  Tuesday, April 25, 2023  1:24 PM

Summary of Contents for WOLVERINE RMAX2 2024





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands