Yamaha WOLVERINE 450 Owner'S Manual Download Page 64 | Manualshive

Page: 64 / 166

background image

7-11

7

During operation

Always keep your feet on the footboards during op-
eration, otherwise they may contact the rear
wheels.

WARNING

EWB00980

Avoid wheelies and jumping. You may lose control
of the ATV or overturn.

WARNING

EWB00990

POTENTIAL HAZARD
Removing hands from handlebars or feet
from footboards during operation.

WHAT CAN HAPPEN
Removing even one hand or foot can reduce
your ability to control the ATV or could
cause you to lose your balance and fall off of
the ATV. If you remove a foot from a foot-
board, your foot or leg may come into con-
tact with the rear wheels, which could injure
you or cause an accident.
HOW TO AVOID THE HAZARD
Always keep both hands on the handlebars
and both feet on the footboards of your ATV
during operation.

POTENTIAL HAZARD
Attempting wheelies, jumps, and other
stunts.
WHAT CAN HAPPEN
Increases the chance of an accident, includ-
ing an overturn.
HOW TO AVOID THE HAZARD
Never attempt stunts, such as wheelies or
jumps. Don’t try to show off.

U3C212E0.book Page 11 Tuesday, June 26, 2007 4:30 PM

«
...
62
63
64
65
66
...
»

Summary of Contents for WOLVERINE 450







































































































































































Reviews:

No comments

Related manuals for WOLVERINE 450

QUAD - PART LIST 2007

Brand: GAS GAS Pages: 77

Brand: Toro Pages: 20

Brand: Chongqing Astronautic Bashan Motorcycle Manufacturing Pages: 16

2004 TRX450FE Fourtrax Foreman FE

Brand: Honda Pages: 249

Polar Trailer 10537

Brand: Clam Pages: 7

Brand: Taylor-Dunn Pages: 134

MAVERICK Trail 2021 Series

Brand: Can-Am Pages: 195

GRIZZLY 700 2014

Brand: Yamaha Pages: 176

Brand: Yamaha Pages: 174

Brand: Buffalo Tools Pages: 2

Brand: Strongway Pages: 16

Brand: PRONAR Pages: 135

Brand: Valor Pages: 66

Brand: Hammerhead Pages: 24

Brand: Kellfri Pages: 8

Brand: Yamaha Pages: 108

Brand: KAYO MOTO Pages: 6

Can-Am Defender DPS HD10

Brand: BRP Pages: 244

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands