Yamaha WOLVERINE 450 Owner'S Manual Download | Manualshive

Page: 3 / 166

background image

EBU17170

INTRODUCTION

EBU17300

Congratulations on your purchase of the Yamaha YFM45FXX. This ATV represents the result of many
years of Yamaha experience in the production of fine sporting, touring, and pacesetting racing machines.
With the purchase of this Yamaha, you can now appreciate the high degree of craftsmanship and reliability
that have made Yamaha a leader in these fields.
This manual will provide you with a good basic understanding of the features and operation of this ATV.

This manual includes important safety information. It provides information about special tech-
niques and skills necessary to ride the ATV.

It also includes basic maintenance and inspection proce-

dures. If you have any questions regarding the operation or maintenance of your ATV, please consult a
Yamaha dealer.

AN IMPORTANT SAFETY MESSAGE:

●

READ THIS MANUAL TOGETHER WITH TIPS FOR THE ATV RIDER CAREFULLY AND COMPLETE-
LY BEFORE OPERATING YOUR ATV. MAKE SURE YOU UNDERSTAND ALL INSTRUCTIONS.

●

PAY CLOSE ATTENTION TO THE WARNING AND CAUTION LABELS ON THE ATV.

●

NEVER OPERATE AN ATV WITHOUT PROPER TRAINING OR INSTRUCTION. FREE TRAINING IS
AVAILABLE TO ANYONE WHO BUYS A NEW ATV. CALL 1-800-887-2887 FOR MORE INFORMA-
TION.

●

THIS ATV, AND ANY OTHER ATV OVER 90 cc, SHOULD NOT BE RIDDEN BY ANYONE UNDER 16
YEARS OF AGE.

●

THIS ATV IS A HIGH-PERFORMANCE ATV FOR OFF-ROAD USE ONLY, FOR SPORT-TYPE REC-
REATIONAL AND COMPETITIVE USE BY EXPERIENCED OPERATORS.

U3C212E0.book Page 1 Tuesday, June 26, 2007 4:30 PM

«
1
2
3
4
5
...
»

Summary of Contents for WOLVERINE 450







































































































































































Reviews:

No comments

Related manuals for WOLVERINE 450

Brand: Taylor-Dunn Pages: 126

DS Gold Standard

Brand: Club Car Pages: 64

Brand: Can-Am Pages: 58

Brand: AC Air Technology Pages: 49

Brand: Yamaha Pages: 200

Brand: Yamaha Pages: 218

YXZ 1000R SS 2020

Brand: Yamaha Pages: 220

Brand: Yamaha Pages: 126

SPARTAN 600 EFI

Brand: Chironex Pages: 56

Brand: Flagro Pages: 29

Brand: Ultra-tow Pages: 8

Sportsman 9920629

Brand: Polaris Pages: 143

Brand: E-Z-GO Pages: 192

Brand: Mahindra Pages: 100

Brand: Panasonic Pages: 91

Brand: Panasonic Pages: 388

Brand: Panther Pages: 10

Raider Pro 250 S

Brand: Dazon Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands