Yamaha WOLVERINE 450 Owner'S Manual Download Page 148

Page: 148 / 166

10-1

EBU25960

SPECIFICATIONS

Dimensions:

Overall length:

1978 mm (77.9 in)

Overall width:

1063 mm (41.9 in)

Overall height:

1095 mm (43.1 in)

Seat height:

840 mm (33.1 in)

Wheelbase:

1233 mm (48.5 in)

Ground clearance:

220 mm (8.7 in)

Minimum turning radius:

3000 mm (118 in)

Weight:

With oil and fuel:

250.0 kg (551 lb)

Engine:

Engine type:

Liquid cooled 4-stroke, SOHC

Cylinder arrangement:

Forward-inclined single cylinder

Displacement:

421.0 cm³

Bore

stroke:

84.5

75.0 mm (3.33

2.95 in)

Compression ratio:

10.00 :1

Starting system:

Electric starter

Lubrication system:

Wet sump

Engine oil:

Type:

YAMALUBE 4, SAE5W30 or SAE10W30 or SAE20W40

Recommended engine oil grade:

API service SG type or higher, JASO standard MA

Engine oil quantity:

Without oil filter cartridge replacement:

2.30 L (2.43 US qt) (2.02 Imp.qt)

0˚

10˚

30˚

50˚

70˚

90˚

110˚

130˚F

YAMALUBE 4 (10W30) or SAE 10W30

YAMALUBE 4-CW (5W30) or SAE 5W30

-20˚

-10˚

0˚

10˚

20˚

30˚

40˚

50˚C

YAMALUBE 4 (20W40) or SAE 20W40

U3C212E0.book Page 1 Tuesday, June 26, 2007 4:30 PM

Summary of Contents for WOLVERINE 450







































































































































































Search results

Summary of Contents for WOLVERINE 450

Reviews:

Related manuals for WOLVERINE 450

Brands by name

Popular brands

Yamaha WOLVERINE 450, Owner'S Manual

Search results

Summary of Contents for WOLVERINE 450

Reviews:

Related manuals for WOLVERINE 450

Brands by name

Popular brands