Yamaha WOLVERINE 450 Owner'S Manual Download Page 109 | Manualshive

Page: 109 / 166

background image

8-24

8

CAUTION:

ECB00420

Be sure no foreign material enters the final
gear case.

7. Install the oil filler bolt, and then tighten it to the

specified torque.

8. Check the final gear case for oil leakage. If oil

is leaking, check for the cause.

9. Install the final gear case guard by installing

the bolts and tightening them to the specified
torque.

EBU23431

Changing the differential gear oil

The differential gear case must be checked for oil
leakage before each ride. If any leakage is found,
have a Yamaha dealer check and repair the ATV.
In addition, the differential gear oil must be
changed as follows at the intervals specified in the
periodic maintenance and lubrication chart.

1. Place the ATV on a level surface.
2. Place an oil pan under the differential gear

case to collect the used oil.

1. Final gear oil
2. Final gear oil filler bolt

3. Correct oil level

Recommended final gear oil:

See page 10-1.

Tightening torque:

Final gear oil filler bolt:

23 Nm (2.3 m·kgf, 17 ft·lbf)

Tightening torque:

Final gear case guard bolt:

16 Nm (1.6 m·kgf, 11 ft·lbf)

U3C212E0.book Page 24 Tuesday, June 26, 2007 4:30 PM

«
...
107
108
109
110
111
...
»

Summary of Contents for WOLVERINE 450







































































































































































Reviews:

No comments

Related manuals for WOLVERINE 450

Brand: BOMBARDIER Pages: 99

1997 TRX300 Fourtrax 300

Brand: Honda Pages: 162

FourTrax Rancher TRX420FE1 2020

Brand: Honda Pages: 273

650 MUD PRO 2011

Brand: Arctic Cat Pages: 84

PROWLER 500 2018

Brand: Textron Pages: 60

Brand: Blata Pages: 24

Tugger train Autarkic E Frame

Brand: Still Pages: 144

Brand: Texas Pages: 7

Brand: Krone Pages: 128

Brand: Krone Pages: 192

Brand: Ski-Doo Pages: 38

Brand: ODES UTVS Pages: 41

Brand: Bad Boy Pages: 143

Brand: Landoll Pages: 82

Brand: HAPERT Pages: 45

Brand: Yamaha Pages: 110

Brand: BOMBARDIER Pages: 44

Brand: Weehoo Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands