Trouble Recovery
81
1.
Stop the engine.
2.
Remove the top cowling.
3.
Disconnect the water detection switch
coupler.
NOTICE:
Be careful not to get
any water on the water detection
switch coupler, otherwise a malfunc-
tion could occur.
[ECM01950]
4.
Unscrew the filter cup from the filter
housing.
NOTICE:
Be careful not to
twist the water detection switch lead
when unscrewing the filter cup.
[ECM01960]
5.
Drain the water in the filter cup by soak-
ing it up with a rag.
6.
Firmly screw the filter cup onto the filter
housing.
NOTICE:
Be careful not to
twist the water detection switch lead
when screwing the filter cup onto the
filter housing.
[ECM01970]
7.
Connect the water detection switch cou-
pler securely until a click is heard.
8.
Install the top cowling.
9.
Start the engine and make sure that the
water separator-alert indicator remains
off. Have a Yamaha dealer inspect the
outboard motor after returning to port.
1. Water separator-alert indicator
1. Water detection switch coupler
1
ZMU05502
1. Filter cup
2. Water detection switch lead
1. Water detection switch coupler
1
2
ZMU05501
1
ZMU05500
Summary of Contents for VZ200R
