3-6
E
INSP
ADJ
CONTROL SYSTEM
• Turn out the cable joint nine times
a
to
extend the cable 7 mm (0.28 in) from the
aligned position.
WARNING
The cable joint must be screwed in more
than 8 mm (0.31 in).
• Connect the cable joint and tighten the
locknut.
T
R
.
.
Locknut:
3.8 N • m (0.38 kgf • m, 2.7 ft • lb)
Trolling speed inspection
1. Inspect:
• Trolling speed
Trolling speed:
1,550–1,750 r/min
Checking steps (watercraft in water):
• Start the engine and allow it to warm up
for 15 minutes.
• Check the engine trolling speed using the
tachometer of the multifunction meter or
using the Yamaha Diagnostic System.
