VS-10/NX-SW10
DIR2
CODEC.DA
CS4227
YM3436
CODEC.AD
AC3D2av(YSS918)
CS4227
DECODER
DOLBY DIGITAL
or
PRO LOGIC
or
DTS
256K SRAM
DSP
ANALOG IN
REAR L
REAR R
CENTER
LFE
DIGITAL IN
LS/RS
LS/RS
C/LFE
C/LFE
L/R
L/R
MAIN R
MAIN L
15
DSP FULL BIT
The main L/R is input through AC3D2av to DSP and then output through all
channels. The same applies as “YSS918” except that the digital data is output in
full bit at D/A.
3. AC-3/dts Through
Only the signal of the digital system is input. The AC3 signal is decoded and reproduced according to
the input source.
The AC-3 signal in each channel is AC-3 decoded and output through AC3D2av.
The combined status information of the sampling frequency and the number of chan-
nels of the AC3 signal appears on the Fl display.
Status information
AC3
48k
3/2
Sampling frequency
Number of channels
Sampling frequency (Display)
Analog
Analo
32kHz
32k
44.1kHz
44.1k
48kHz
48k
Number of channels
(Front/Rear)
(Display)
1+1
1+1
1/0
1/0
2/0
2/0
3/0
3/0
2/1
2/1
3/1
3/1
2/2
2/2
3/2 5.1ch
3/2
7.1 (DTS)
7.1
VIDEO2 IN
:
– 20dBV, Both ch
VOLUME
:
MAX
CB306 (Page E-31, F-3)
MAIN L (1kHz)
:
– 11dBV
MAIN R (1kHz)
:
– 11dBV
LFE (30Hz)
:
– 13dBV
REAR L (1kHz)
:
– 17dBV
REAR R (1kHz)
:
– 17dBV
CENTER (1kHz)
:
– 17dBV
The shaded square means that the element included in it does not operate.