VS-10/NX-SW10
11
Display
05
DSP
Diag
Function
The DSP DIAG (self-diagnosis) mode is initiated. (Refer to page 7 for the details.)
06
Ver-A1.05
Microprocessor version / date display
Example of microprocessor display
06
Ver-A1.05
Example of microprocessor date display
06
'00.08.23
What is displayed varies depending on the microprocessor software.
07
SUM[cdbc]
Check sum calculation display / re-calculation
08
PrCan-OFF
All protection cancellation function ON/OFF *
1
09
Pr!C–P–S–
Protection operation history display / clear
C
: VS-10 amplifier voltage (DC)
P
: Power supply circuit voltage
S
: SW-VS10 (Subwoofer) side
–
: Normal
x
: Abnormal
10
RemoCorrR
ROM collection (EEPROM) remote control data reception / data write
This test mode is not usually used.
*
1
CAUTION:
Using this product with the protection function cancelled may cause damage to itself. Use special care for this point
when using this mode.