VS-10/NX-SW10
Amplifier Unit
A
Grill Assembly
9
■
SW-VS10 DISASSEMBLY PROCEDURES
(Remove parts in the order as numbered below.)
1. Removal of Grille Assembly.
a. Insert the tip of flat tip (-) screwdriver to the slot on the
bottom.
Push up the Grille Assembly by applying force to the
screwdriver. (Fig. 8).
b. Keep pushing up the Grille Assembly gradually until it
can be removed.
* The Grille Assembly is fixed securely at 6 dowels.
When removing it, use care not to cause a scratch
or any damage to the main unit. When reinstalling
it, apply quick-drying type bond to the dowels of the
Grille Assembly and fit it in place securely. (If it is
only pushed in, it will come off easily.)
2. Removal of Amplifier Unit
a. Remove 14 screws (
A
) and then remove the Amplifier
Unit. (Fig. 9)
Fig. 9
Fig. 8
