17
E
nglish
O
P
E
RA
TION
• When the STANDBY indicator lights or flashes, the
power can be turned on using
p
on the remote
control. The power also can be turned on by pressing
the INPUT selector button on the control center.
• The VS-10 memorizes the last state when the power
is turned off. If you turn off the power using
POWER on the control center in standby mode
(when the STANDBY indicator lights), the unit
enters standby mode when you press POWER on the
control center next time.
If you turn off the power using POWER on the
control center when the power is turned on (when the
STANDBY indicator does not light), the power is
turned on when you press POWER on the control
center next time.
2
Press the INPUT selector button.
Each time the button is pressed, the input is switched in
the order: VIDEO 1
→
TV
→
VIDEO 2
→
DIGITAL 1
→
DIGITAL 2.
1
Press POWER on the control center and press
p
on the remote control to turn on the power.
OPERATING THE UNIT
Enjoying the Home Theater Sound System
This section describes how to select the input source to enjoy the sound from a TV, VCR, DVD player, satellite tuner or video
game player with the VS-10 and to adjust the volume.
First turn on the power of the playback component and the TV, and then follow the steps described below.
POWER
STANDBY
PHONES
INPUT
SILENT
DIGITAL2
VIDEO2
DSP
VOLUME
1
2
3
EFFECT
DSP
SET
INPUT
2
3
1
–
VOL
VOL
+
P
VS10
TV
VCR
SAT
ON/OFF
P
MEMORY
3
1
2
When the
STANDBY indicator
lights or flashes.
CAUTION
When the “TV”, “VCR” or “SAT” button on the remote
control is pressed to control another unit, the remote
control can not control the VS-10. In this case, press the
“VS10” button on the remote control and operate the
VS-10.
OPERATION
Remote control
or
Front panel
3
Adjust the level using VOLUME
B
/
N
(or VOL
+/– on the remote control).
Pressing VOLUME
B
(or VOL + on the remote
control) increases the level, while pressing VOLUME
N
(or VOL – on the remote control) decreases the
level.
Remote control
or
Front panel
Remote control
Front panel
