Yamaha VMX12H, Supplementary Service Manual

Page: 42 / 405

FRONT
FORK
IN STALL
ON
Reverse the “REMOVAL” procedure.
Note the following points.
Front
NOTE:
Be sure the inner fork tube end is flush with
the top of the handle crown.
Temporary tighten the pinch bolts.
2.
Tighten
Pinch bolts (under bracket)
Cap bolt (front fork)
•
Pinch holt ,handle crown)
Pinch bolt (lower bracket):
Cap bolt (front fork):
Pinch bolt (handle crown):
23 Nm (2.3 m kg, 17
ft
23 Nm
(2.3
m kg, 17
ft
23 Nm (2.3 m kg, 17 ft
3.
Adjust:
.
Front fork air pressure
Refer to FRONT FORK ADJUSTMENT” in
the CHAPTER 2.
4.
Install:
Fork brace
Front fender
5.Install:
.
Frontwheel
Front wheel axle:
Pinch
bolt
(wheel axle):
60 Nm (6.0 m
kg,
43
ft Ib)
20 Nm (2.0 m kg, 14
ft Ib)
-14-