Yamaha Venture XVZ13TFS, Owner'S Manual

Page: 22 / 121

INSTRUMENT AND CONTROL FUNCTIONS
3-6
3
NOTE:
Pressing the cruise control switch once
will change the speed in increments of
1.6 km/h (1 mi/h). Holding the cruise
control switch down will increase or de-
crease the speed continuously until the
switch is released.
The traveling speed can be set to a
maximum of 130 km/h (80 mi/h) and a
minimum of 50 km/h (30 mi/h).
When the cruise control system is acti-
vated and the throttle grip is turned to
increase the speed by up to 8 km/h
(5 mi/h), the cruise control system will
return to the set speed after the throttle
grip is released. However, if the speed
is increased by more than 8 km/h
(5 mi/h), the cruise control system will
be deactivated until the traveling speed
is within 8 km/h (5 mi/h) of the set
speed.
Deactivating the cruise control sys-
tem
Applying the front or rear brake or dis-
engaging the clutch will automatically
deactivate the cruise control system.
Push the “CANCEL” switch to manually
deactivate cruise control.
NOTE:
● When the cruise control system is
deactivated, the “RES” (resume)
indicator light will come on.
●
Traveling speed decreases as
soon as the cruise control system
is deactivated; unless the throttle
grip is turned.
Push the “RES/ACC” side of the cruise
control switch to reactivate the system.
The traveling speed will return to the
previously set speed. The “RES” indi-
cator light will flash during this time and
then go off. Once the cruise control sys-
tem is reactivated, the “SET” indicator
light will come on.
Push the “CRUISE” switch to the right
to turn the cruise control system off
completely.
WARNING
EWA11070
If the cruise control system is defec-
tive, the “SET” and “RES” indicator
lights will flash simultaneously. If
this occurs, turn the cruise control
system off and have a Yamaha deal-
er check it.
1. “SET” indicator light
2. “RES” indicator light
3. “ON” indicator light
4XY15.book Page 6 Monday, May 19, 2003 5:24 PM