Race Dynamics PowerTRONIC, Installation Manual

Page: 1 / 25

PowerTRONIC Installation Manual- KTM Duke 390 (2012-2016)
Document Version 1 Release Date 02 March 2020
Application information Vehicle Specific
Vehicle KTM
Model Duke 390
Year of manufacture 2012-2016
PowerTRONIC application All PowerTRONIC ECUs, from firmware version F.3.x onward
Note:
● Read through all instructions before installation and use.
● Ensure that the bike is switched off and the key is out of the ignition before proceeding with the
installation.
●
Some parts of the bikes might be hot/sharp and may cause burns/cuts. Proceed with extreme
caution or wait until the bike has cooled down. Always wear safety gloves.
● When the installation is complete, make sure to secure the wiring loom away from the movable parts
or components which tends to heat up during the normal operation of the vehicle at any chance.
●
PowerTRONIC is intended for motorsport use on a closed course, please check with your local laws
before using this product. Race Dynamics / PowerTRONIC is not liable for consequences arising out
of using the product.
Call/Whatsapp: +919916229292 / +918040929292
E-Mail: support@powertronicECU.com
Official Website: www.powertronicECU.com
Social: www.facebook.com/PowertronicECU/
www.instagram.com/powertronic_ecu/
1