Yamaha TZ250M1, Owner'S Service Manual

Page: 96 / 287

BATTERY INSPECTION
3-43
INSP
ADJ
6. Check:
• Ignition timing
Punch mark
a
on rotor should be aligned
with punch mark
b
on stator.
Not aligned
≥
Adjust.
NOTE:
Be sure to use the punch mark “F1”.
7. Adjust:
• Ignition timing
Adjustment steps:
• Loosen the screws (stator)
1
.
• Align the punch marks by turning the stator
2
.
• Tighten the screws (stator).
T
Screw (stator):
7 Nm (0.7 m•kg, 5.8 ft•lb)
EC375000
BATTERY INSPECTION
W
To prevent danger, read the battery label
carefully before handling the battery.
1. Connect the checking lead (supplying
parts)
2
to the power supply coupler
1
.
2. Check:
• Battery voltage
Out of specification
≥
Replace.
Tester (+) lead
≥ ≥
Red lead
3 3
Tester (-) lead
≥ ≥
Black lead
4 4
%
Battery voltage
Tester selector
position
12.5V or more DCV-20
?