Yamaha TZ250M1, Owner'S Service Manual

Page: 84 / 287

FRONT FORK COMPRESSION DAMPING FORCE
ADJUSTMENT
3-31
• STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
Standard position:
10 clicks out
a
NOTE:
Fully turn in the adjuster and then turn it out.
Specify the position in which the first click is
heard as the zero position. If a click is heard
just when the adjuster is fully turned in, this
position is zero.
CC CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
W
Always adjust each front fork to the same
setting. Uneven adjustment can cause poor
handling and loss of stability.
INSP
ADJ
Stiffer
a a
≥ ≥
Increase the compression
damping force. (Turn the
adjuster
1 1
in.)
Softer
b b
≥ ≥
Decrease the compression
damping force. (Turn the
adjuster
1 1
out.)
Extent of adjustment:
Maximum Minimum
Fully turned-in Fully turned-out
position position
]
EC36J030
FRONT FORK COMPRESSION DAMPING
FORCE ADJUSTMENT
1. Adjust:
• Compression damping force
By turning the adjuster
1
.