Yamaha TT250RA Owner'S Manual Download Page 68

Page: 68 / 88

PERIODIC MAINTENANCE AND ADJUSTMENT

7-29

1. Remove cowling A. (See

page 7-7.)

2. Remove the headlight unit by re-

moving the bolts.

3. Disconnect the headlight coupler,

and then remove the headlight

bulb cover.

4. Remove the headlight bulb holder

by turning it counterclockwise, and
then remove the burnt-out bulb.

5. Place a new bulb into position, and

then secure it with the bulb holder.

6. Install the bulb cover, and then

connect the coupler.

7. Place the headlight unit in the orig-

inal position, and then install the
bolts.

8. Install the cowling.
9. Have a Yamaha dealer adjust the

headlight beam if necessary.

EAU24133

Replacing the tail/brake light
bulb

1. Remove the tail/brake light lens by

removing the screws.

2. Remove the burnt-out bulb by

pushing it in and turning it counter-
clockwise.

1. Do not touch the glass part of the bulb.

1. Bolt

1. Headlight bulb holder

1. Screw

2. Tail/brake light lens

Summary of Contents for TT250RA

























































































Search results

Summary of Contents for TT250RA

Reviews:

Related manuals for TT250RA

Brands by name

Popular brands

Yamaha TT250RA, Owner'S Manual

Search results

Summary of Contents for TT250RA

Reviews:

Related manuals for TT250RA

Brands by name

Popular brands