Yamaha TT250RA Owner'S Manual Download Page 52

Page: 52 / 88

PERIODIC MAINTENANCE AND ADJUSTMENT

7-13

4. Remove the sponge material from

the air filter element frame.

5. Clean the sponge material with

solvent, and then squeeze the re-
maining solvent out.

6. Apply oil of the recommended type

to the entire surface of the sponge
material, and then squeeze the ex-
cess oil out.

TIP

The sponge material should be wet but

not dripping.

7. Install the sponge material onto

the frame, and then insert the air
filter element into the air filter case.

8. Place the air filter case cover in the

original position, and then tighten
the fasteners.

NOTICE:

Make

sure that the air filter element is

properly seated in the air filter
case. The engine should never
be operated without the air filter
element installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively worn.

[ECA10481]

9. Install the panel.

1. Air filter element

1. Sponge material

2. Air filter element frame

Recommended oil:

Yamaha foam air filter oil or other
quality foam air filter oil

Summary of Contents for TT250RA

























































































Search results

Summary of Contents for TT250RA

Reviews:

Related manuals for TT250RA

Brands by name

Popular brands

Yamaha TT250RA, Owner'S Manual

Search results

Summary of Contents for TT250RA

Reviews:

Related manuals for TT250RA

Brands by name

Popular brands