background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-16

7

Yamaha dealer, who has the
necessary professional knowl-
edge and experience.

It is not recommended to patch
a punctured tube. If unavoid-
able, however, patch the tube
very carefully and replace it as
soon as possible with a high-
quality product.

Ride at moderate speeds after
changing a tire since the tire
surface must first be “broken
in” for it to develop its optimal
characteristics.

EAU21942

Spoke wheels 

WARNING

EWA10610

The wheels on this model are not de-
signed for use with tubeless tires.
Do not attempt to use tubeless tires
on this model.

To maximize the performance, durabil-
ity, and safe operation of your motorcy-
cle, note the following points regarding
the specified wheels.

The wheel rims should be checked
for cracks, bends or warpage, and
the spokes for looseness or dam-
age before each ride. If any dam-
age is found, have a Yamaha
dealer replace the wheel. Do not
attempt even the smallest repair to
the wheel. A deformed or cracked
wheel must be replaced.

The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced wheel can result in
poor performance, adverse han-
dling characteristics, and a short-
ened tire life.

EAU22034

Adjusting the clutch lever free 
play 

The clutch lever free play should mea-
sure 10.0–15.0 mm (0.39–0.59 in) as
shown. Periodically check the clutch le-
ver free play and, if necessary, adjust it
as follows.

1. Slide the rubber cover back at the

clutch lever.

2. Loosen the locknut.
3. To increase the clutch lever free

play, turn the clutch lever free play
adjusting bolt in direction (a). To
decrease the clutch lever free play,
turn the adjusting bolt in direction
(b).

1. Clutch lever free play

U39C81E0.book  Page 16  Monday, April 26, 2010  2:43 PM

Summary of Contents for TT-R125E





























































































Reviews: