Yamaha TT-R125, Owner'S Service Manual

Page: 428 / 616

4 - 82
ENG
TRANSMISSION, SHIFT CAM AND SHIFT FORK
3. Install:
●
Plain washer 1
●
Circlip 2
NOTE:
●
Be sure the circlip sharp-edged corner
a
is
positioned opposite side to the plain washer
and gear
b
.
●
Be sure the circlip end
c
is positioned at
axle spline groove
d
.
New
4. Install:
●
Push rod 2
On main axle.
NOTE:
Apply the engine oil on the push rod 2.
5. Install:
●
Washer 1
On drive axle.
6. Install:
●
Main axle
●
Drive axle
Install these in the left crankcase at the
same time.
NOTE:
●
Apply the lithium soap base grease on the oil
seal lip.
●
When installing the drive axle into the crank-
case, pay careful attention to the crankcase
oil seal lip.