Yamaha TT-R110E Owner'S Manual Download

Page: 37 / 90

Instrument an

control functions

4-11

With the engine turned off:
1. Make sure that the engine stop switch

is set to “ ”.

2. Turn the key to “ON”.
3. Shift the transmission into gear.

5. Push the start switch.

4. Keep the front or rear brake applied.

Does the engine start?

6. Shift the transmission into the neutral

position.

7. Push the start switch.

Does the engine start?

The system is OK.

The motorcycle can

be ridden.

The neutral switch may not be working
correctly.

The motorcycle should not be ridden

until checked by a Yamaha dealer.

The neutral switch may not be working
correctly.

The motorcycle should not be ridden

until checked by a Yamaha dealer.

WARNING

If a malfunction is noted, have a
Yamaha dealer check the system
before riding.

YES

UB5181E0.book Page 11 Monday, April 6, 2015 9:22 AM

Summary of Contents for TT-R110E



























































































Search results

Summary of Contents for TT-R110E

Reviews:

Related manuals for TT-R110E

Brands by name

Popular brands

Yamaha TT-R110E, Owner'S Manual

Search results

Summary of Contents for TT-R110E

Reviews:

Related manuals for TT-R110E

Brands by name

Popular brands