Yamaha TSX-B237 Owner'S Manual Download Page 39

Page: 39 / 47

Troubleshooting

FM reception

Problem

Cause

Solution

FM stereo reception is noisy.

The radio station you selected may be far from your area, or the
antenna input is poor.

Change the height or direction of the antenna, or change the
position of the unit.

Automatic tuning does not work.

The radio station you selected may be far from your area, or the
antenna input is poor.

Change the height or direction of the antenna, or change the
position of the unit.

Tune in to a station manually (



p. 18).

Cannot select a preset radio station.

The preset stations may have been erased.

Preset radio stations again (



p. 18).

There is distortion, and clear reception
cannot be obtained.

Multipath reflection or other radio interference may be occurring.

Change the height or direction of the antenna, or change the
position of the unit.

Qi charging is interfering with radio reception.

Disable the Qi charging function (



p. 33).

Summary of Contents for TSX-B237
















































Search results

Summary of Contents for TSX-B237

Reviews:

Related manuals for TSX-B237

Brands by name

Popular brands

Yamaha TSX-B237, Owner'S Manual

Search results

Summary of Contents for TSX-B237

Reviews:

Related manuals for TSX-B237

Brands by name

Popular brands