Yamaha TR-5630RDS Owner'S Manual Download

Page: 48 / 106

SOUND FIELD PROGRAM PARAMETER EDITING

Changing parameter settings

The initial sound field program settings will provide you
with an excellent listening experience as they are. It is not
necessary to alter these settings, but you can create an
original listening environment by doing so.

Note

• The editable parameters vary depending on the sound field

program you select. Refer to the explanation for the parameter.

Select a sound field program.

Press

to select the

parameter you want to
change.

Press –/+ to change the
parameter setting.

Repeat steps 1 – 3 if you wish to alter other
parameters.

Note

• You cannot alter these parameters if the “OPTION 2 MEM.

GUARD” parameter in the Set menu is set to ON. Change this
setting to OFF if you wish to alter any other parameters.

TEST

PROG

STEREO

LEVEL

SET MENU

MUTE

VOLUME

PROG

MUTE

11V340G_50-58_EN(03.4.14)a.p65

03.4.14, 11:51 AM

All manuals and user guides at all-guides.com

Summary of Contents for TR-5630RDS











































































































Search results

Summary of Contents for TR-5630RDS

Reviews:

Related manuals for TR-5630RDS

Brands by name

Popular brands

Yamaha TR-5630RDS, Owner'S Manual

Search results

Summary of Contents for TR-5630RDS

Reviews:

Related manuals for TR-5630RDS

Brands by name

Popular brands