Yamaha TR-5630RDS Owner'S Manual Download

Page: 95 / 106

Repeat the program playback

●

During playback of the programmed tracks, press
REPEAT. The programed tracks can be played
again.

Note: If you select Shuffle mode by pressing REPEAT
several times, the DVD player cancels program
playback.

OSD language

This option is to select a language for information
displayed on TV screen.

Press

to highlight “OSD Language” in the

General Setup menu.

Enter its submenu by pressing

Move the cursor by pressing

to highlight the

selected language.

Press ENTER/OK to confirm.

Press

to return to the General Setup Page.

Screen Saver

This function is used to turn the screen saver on
or off.

Press

to highlight “Screen Saver” in the

General Setup menu.

Enter its submenu by pressing

Move the cursor by pressing

to highlight the

selected item.

➜

On: In STOP or No DISC mode, if no actions

are performed within 5~6 minutes, the screen
saver will be activated.

➜

Off: Screen saver is disabled.

Press ENTER/OK.

Press

to return to the General Setup Page.

Audio Setup menu

There are items included in Audio Setup Page
such as “Speaker Setup”, “Digital Audio Setup”,
“Equalizer” and “3D”.

Press SETUP to enter the setup menu.

Press

to choose the AUDIO SETUP icon

Speaker Setup

This menu contains setup options for your analog
audio output, such as “Downmix”, “D.R.C.”
(Dynamic Range Compression) etc. which makes
the setup system reproduce high quality surround
sound.

Downmix

Press

to highlight the “Downmix”.

Enter its submenu by pressing

Move the cursor by pressing

to highlight the

selected item.

●

LT/RT

➜

This option should be used only if your DVD

player is connected to a Dolby Prologic decoder.

●

Stereo

➜

This option will downmix Dolby Digital signals

directly into analogue stereo from L/R jacks.

●

Virtual Surround

➜

This option will reproduce the surround

channels virtually.

Press ENTER/OK.

Press

to return to the Audio Setup Page.

D.R.C. (Dynamic Range Compression)

The DVD player will compress the dynamic range
of its sound output for late-night listening.

Press

to highlight “D.R.C.”.

Enter its submenu by pressing

Move the cursor by pressing

to highlight the

selected item.

➜

On: Enable D.R.C.

➜

Off: Disable D.R.C.

Press ENTER/OK.

Press

to return to the Audio Setup Page.

Setup Menu

All manuals and user guides at all-guides.com

Summary of Contents for TR-5630RDS











































































































Search results

Summary of Contents for TR-5630RDS

Reviews:

Related manuals for TR-5630RDS

Brands by name

Popular brands

Yamaha TR-5630RDS, Owner'S Manual

Search results

Summary of Contents for TR-5630RDS

Reviews:

Related manuals for TR-5630RDS

Brands by name

Popular brands