Yamaha TR-5630RDS Owner'S Manual Download

Page: 21 / 106

English

PREP

ARA

TION

SET MENU

BASIC

SOUND

INPUT

OPTION

1 SETUP

Press –/+ to alter the settings for each
parameter. Use

to move to the next

setting.

2 SP LEVEL

Press –/+ to adjust the balance between
each speaker and the left main speaker.
Use

to move to the next setting.

ROOM

Choose from S/M/L.

SUBWOOFER

Choose either of YES/NONE.

SPEAKERS

Choose from 2/3/4/5 spk.

SET/CANCEL

Choose either of SET/CANCEL.

CHECK OK:

Choose either of YES/NO.

L-R

Adjust the balance between the main
left and right speakers.

Adjust the balance between the main
left and center speakers.

Adjust the balance between the main
left and rear left speakers.

Adjust the balance between the rear
left and rear right speakers.

SET

BASIC SYSTEM SETTINGS

YES

CANCEL

• After altering the “1 SETUP” parameters, readjust the output levels of the speakers at “2 SP LEVEL”.
• See pages 39 – 44 for a detailed explanation of the “SOUND”, “INPUT” and “OPTION” menus.

SWFR

Adjust the balance between the main
left speaker and the subwoofer.

05V340G_19-21_EN(03.3.18)a.p65

03.4.14, 11:49 AM

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for TR-5630RDS











































































































Search results

Summary of Contents for TR-5630RDS

Reviews:

Related manuals for TR-5630RDS

Brands by name

Popular brands

Yamaha TR-5630RDS, Owner'S Manual

Search results

Summary of Contents for TR-5630RDS

Reviews:

Related manuals for TR-5630RDS

Brands by name

Popular brands